You are here:

Motorcycle Repair/Experts

Expert	Average Ratings	Expertise
Jan Ringnalda U.S. Available View Profile Ask A Question View Past Answers	Knowledgeability 9.96 Clarity of Response 9.87 Timeliness 9.87 Politeness 9.90 Total Questions 573	PLEASE NOTE: PLEASE READ THIS!!! I can help with questions ONLY on any Honda CBX-1000 motorcycle, only 1978 to 1982. OR 1981 to 1983 Honda CB1100R models ONLY Honda CBX/CB1100R motorcycles, Please NO other makes, no other models. IF YOUR QUESTION IS FOR ANY OTHER BIKE Your question WILL BE FORWARDED TO THE QUESTION POOL WHERE IT MAY NEVER BE ANSWERED.
Mike Wells U.S. Available View Profile Ask A Question View Past Answers	Knowledgeability 9.94 Clarity of Response 9.92 Timeliness 9.96 Politeness 9.98 Total Questions 16540	PLEASE READ BEFORE ASKING A QUESTION!!! I CAN ONLY ANSWER QUESTIONS ABOUT HARLEYS !!! I DONT KNOW ANYTHING ABOUT OTHER MODELS!!! I have a Harley only shop with 30 years experience located in Ohio. We specialize in complete and total repair, restoration, hi-performance, and custom bike building. I can work on Flat Heads to Twin Cams. Please, dont ask how much somthing is going to cost to fix. Labor prices differ all over te country as well as shop to shop!
(Sidecar) Bob Kingsmill Canada On Vacation returns 03/02/2010 View Profile View Past Answers	Knowledgeability 9.94 Clarity of Response 9.98 Timeliness 10.0 Politeness 10.0 Total Questions 232	I HAVE NO EXPERIENCE WITH HARELYS. ATVs ARE NOT MOTORCYCLES. DO NOT ASK ME ABOUT THEM. DON'T ASK UNLESS YOU HAVE LOOKED IN THE SHOP MANUAL FIRST - IT ONLY ROBS SOMEONE WITH A REAL QUESTION OF THE OPPORTUNITY. You can ask me electrical questions about 1975-85 HONDAS. You can ask me about driving sidecars in the winter, or sidecars in general. You can ask me general motorcycle repair questions, but my main experience is with Honda CX500, GL500, CX650, GL650, GL1000 and GL1100 models. I also know a bit about the Suzuki GS400 and 1980s Dneprs, but I haven't touched either in years. If you ask about a model I am not familiar with I will do my best to find your answer.
Bill Silver U.S. Maxed Out View Profile View Past Answers	Knowledgeability 9.93 Clarity of Response 9.93 Timeliness 10.0 Politeness 10.0 Total Questions 3621	Need help with vintage Hondas from the 1960s? I am an expert with 250-305cc bikes in particular and most all of the other pre-91 models, in general. I do NOT claim to have a great deal of experience on Gold Wings, Cruisers, ATC/ATVs and dirt bikes.

Volunteer to be an expert in this category

Recent Answers

2010-02-09 Running between 5000 and 6000 rpm:

Dex, the 250-350 carburetors need some careful care and correct parts to run properly. http://www.cmsnl.com/honda-cb250k4-england_model8207/partslist/E19.html for a list of parts. Poor running on

2010-02-08 78 honda400 carbs:

Jesse, take the float bowl off and release the float downwards so the needle drops down out of the float valve seat. If nothing comes out, then there is a block in the interconnecting tube between the

2010-02-07 oil leaking from bike:

you can do it. I is pretty easy. If you look at the top of the oil pump you will see two plugs. the one to the rear is the plug you need to remove. you will either have to pinch off the oil line or drain

2010-02-07 oil leaking from bike:

What is happening is the same thing that happens to alot of other riders. Your oil tank sits higher than your motor. There is a ball and spring that is suppose to keep oil out of the motor when its not