| Recent Answers |
 |
|
2008-06-28 Bicycle Repair - method for cleaning chain: To properly clean the chain you will need to disassemble the whole chain. Disassemble the whole chain until you have all of the outer plates, inner plates, pins, and rollers separated. You will need to...
|
2008-06-28 Bicycle Repair - gears: You will need to adjust the rear derailluer-this is the mechanism that shifts the gears. To do this you will need to use the barrel adjustment screw at the back of the derailluer where the cable enters...
|
2008-06-28 BMX - fitting brakes: Ok do you know what type of brakes they have? I can't do much without knowing what they look like. As a basis there will be a bolt that goes into the cantilever that holds it to the brake boss, you need...
|
2008-06-28 Bicycle Repair - fork removal: You can either buy a larger bike bag to fit your bike without removing the fork, or you can have the fork removed. You will need to leave this to the pro to remove it due to precision bearings inside the...
|
2008-06-27 Bicycle Repair - cranksets: You will need to get a new crankset that is the same length and same thread size as your current crankset. To replace it, you will need to remove the cotter pins holding that hold the arms in, and then...
|