| Recent Answers |
 |
|
2008-06-28 method for cleaning chain: To properly clean the chain you will need to disassemble the whole chain. Disassemble the whole chain until you have all of the outer plates, inner plates, pins, and rollers separated. You will need to...
|
2008-06-28 gears: You will need to adjust the rear derailluer-this is the mechanism that shifts the gears. To do this you will need to use the barrel adjustment screw at the back of the derailluer where the cable enters...
|
2008-06-28 fork removal: You can either buy a larger bike bag to fit your bike without removing the fork, or you can have the fork removed. You will need to leave this to the pro to remove it due to precision bearings inside the...
|
2008-06-27 cranksets: You will need to get a new crankset that is the same length and same thread size as your current crankset. To replace it, you will need to remove the cotter pins holding that hold the arms in, and then...
|
2008-06-27 bearing retainer: You can replace the retainers with new bearing types as long as they fit correctly. You can find these at your local bike shop. The old retainers are still available but not all bike shops will carry them...
|
| More Answers for "Bicycle Repair" |