You are here:
| Expert | Average Ratings | Expertise |
|---|---|---|
Douglas GanU.S.
Available
|
Most any question regarding an airbag system repair and or replacement |
Hi Jennie: You do not say what year the vehicle is, but it may not matter. Beginning in about 2008, Ford uses a seat sensor system to switch the airbag on or off and change the deployment of the passenger
Hello Kenneth: There are specific items that are required replacement items when a deployment occurs or when an airbag light comes on...and there are some items that are "check only". Check out the
Hi Greg: Sorry about your problem. You have replaced the most popular part that fails. At this point, you will need to connect with a tech that has airbag and component simulators. These are test
Hi Jesse: You're welcome. If you pulled the seat out previously, it's not much harder. You will either have to pull the seat again, or remove the console to get to the seat belt buckle nut. I believe
Hi Jesse: Indeed, a code 33 is a fault for a seat belt pretensioner circuit (driver side). Based on your information, the replacement seat is from a vehicle that has had a deployment, thus the buckle

©2012 About.com, a part of The New York Times Company. All rights reserved.