AutoCAD/Experts

ExpertAverage RatingsExpertise

Bob

U.S.
Available
  • Knowledgeability 9.82
  • Clarity of Response 9.82
  • Politeness 9.87
  • Response Time(hr) 19.9
  •  --Last 90 Days(hr) 29.1
  • Total Questions 831
 I am good at helping Architects and Interior Designers who are intimidated by Autocad, ADT, etc. to feel comfortable, get things done. If you are in another field, I will do what I can for you. PLEASE READ AND FOLLOW MY INSTRUCTIONS TO QUESTIONER-- MOST DON'T FOLLOW THEM, AND IT MAKES IT VERY HARD TO ANSWER WELL-- THANKS

Shauna Anderson

U.S.
Available
  • Knowledgeability 9.76
  • Clarity of Response 9.53
  • Politeness 9.88
  • Response Time(hr) 41.3
  •  --Last 90 Days(hr) 34.7
  • Total Questions 74
 I can answer most AutoCAD questions. I can not answer questions about their vertical products. I do not do 3D.

J. B. Borge

U.S.
Available
  • Rating N/A
  • (Expert Not Accept Rating)   
  • Response Time(hr) 68.3
  •  --Last 90 Days(hr) 193.4
  • Total Questions 469
 I can answer general questions about Autocad & Solid Works.

Scott Cook

Available
  • Knowledgeability 9.74
  • Clarity of Response 9.60
  • Politeness 9.94
  • Response Time(hr) 40.2
  •  --Last 90 Days(hr) 53.1
  • Total Questions 898
 I`ve been using AutoCAD since 1987 and programming AutoLISP nearly as long. I can answer questions about programming AutoCAD (except ARX) and production enhancement techniques. I cannot answer questions about AutoCAD crashes or DWG corruption. AutoCAD PROGRAMMING (menus, lisp) related questions only!

Scott Wilcox

Canada
Available
  • Knowledgeability 9.75
  • Clarity of Response 9.75
  • Politeness 9.75
  • Response Time(hr) 33.3
  •  --Last 90 Days(hr) 43.0
  • Total Questions 75
 I have been using AutoCAD since R11, and can answer questions regarding general AutoCAD, menus, toolbars, fonts, linetypes, plotting, CUI, Some Civil 3D

Bill DeShawn

Available
  • Knowledgeability 9.84
  • Clarity of Response 9.85
  • Politeness 9.98
  • Response Time(hr) 15.9
  •  --Last 90 Days(hr) 8.7
  • Total Questions 1462
 I can address all 2-D questions and some 3-D questions. I do programming in AutoLISP if it doesn`t involve solid modeling. I can also address menu customization issues and can help you find answers to questions I can`t answer by taking your question directly to Autodesk via their newsgroups.

Shantaram Pardeshi

India
Available
  • Knowledgeability N/A
  • Clarity of Response N/A
  • Politeness N/A
  • Response Time(hr) 18.3
  •  --Last 90 Days(hr) N/A
  • Total Questions 28
 You can ask me question related to AutoCAD Programming. Regarding use of AutoCAD Customization tools such as AutoLISP, VisualLISP & AutoCAD VBA

Recent Answers

2012-01-24 ACAD: BMP to vector:

Leif:  You are very welcome.  AutoCAD has a DXFOUT, which acts like a SAVEAS DXF.  It doesn't vectorize an image.  What I have done in the past is to attach an image and draw over the top of it in order

2012-01-23 ACAD: BMP to vector:

Leif:  If you are using full AutoCAD (not AutoCAD LT, the referenced image file will produce a better print than a vectorized version of the image.  However, you can buy/download software that will do

2012-01-13 autolisp question:

Sindra:  Thank you, I'm doing pretty well, despite the awful downturn in the economy.  At least I still  have a roof over my head and a place to do my work.  I certainly hope that you and your friends

2012-01-07 autocad text command:

Well to begin, let's make sure that the current UCS's East Side is set to the right of the screen.  Draw a line (pick a point# @10<0.  It should come out horizontal so that the starting point of the line

2012-01-04 Exploding blocks:

It is possible that your drawing still has the objects in question, but the layer(s) is off or frozen.    Check your drawing layers status to see if this is indeed the case.    You can also select a block

More Answers in Category AutoCAD


AutoCAD

All Answers

Answers by Expert:

Ask Experts

Volunteer

©2012 About.com, a part of The New York Times Company. All rights reserved.