You are here:
AutoCAD/Expert Profile
Expertise
All Isometric drawing in a 2D cad system. 3D modeling in AutoCad (not LT), CATIA, and some SolidWorks.
Experience in the area
From the days of drawing on paper with pencil. Began CAD work about 1988.
Education/Credentials
On the job training and self-taught
Average Ratings
Recent Reviews from Users
K = Knowledgeability C = Clarity of Response T = Timeliness P = Politeness| User | Date | K | C | T | P | Comments |
|---|---|---|---|---|---|---|
| Asif Ali | 10/07/09 | 10 | 10 | 10 | 10 | Thank you for your reply |
| prasanna | 04/14/09 | 10 | 10 | 10 | 10 |
Recent Answers from George Reid
2009-10-01 Copy & Paste:
Asif, I have a similar system to you and I'm using ACAD 2008 also. I have been using a lot of copy/paste for some of my drawings and have found that sometimes it isn't hung up it just takes a little
2009-09-25 Dimension Problems:
Mike, You may have already solved this problem. When I experience something like I always look at the layers first. I may be on a layer that is turned off or somehow the dimension is set for the same color
2009-09-09 autocad:
The options for printer sizes are not installed with Autocad. They are installed with the printer. Therefore, if you have not installed a 24x36 printer or plotter onto the Windows system you will not see
2009-08-13 About Fonts:
Fonts are usually installed with the printer drivers, although Windows also installs some fonts. Also, they are installed with your word processor. The fonts are stored in a single place and all programs
2009-07-15 QUESTION FOR VIEWING TOOL BARS:
Mohammad, I also have ACAD 2008 but my 2009 is the LT version. Since I don't like, for now, the look of the 2009 screen and the dashboard I changed it to the traditional look so it's the same as the 2008
©2009 About.com, a part of The New York Times Company. All rights reserved.