You are here:
Any question related to IP routing protocols - BGP/OSPF/IGRP/EIGRP/RIP, HSRP. Bridging/DLSW, Cisco routers and Switches, LAN/WAN installation and monitoring.
I have about 14 yeras of experience in networking. I am an MCSE and CCIE (7334).
| User | Date | K | C | T | P | Comments |
|---|---|---|---|---|---|---|
| pravin Oza | 10/07/09 | 9 | 8 | 9 | 9 | Thanks for responce. I unable to rank ..... |
| fredethone | 09/15/09 | 10 | 10 | 10 | 10 | thank you very much. |
| Richelle | 09/03/09 | 10 | 10 | 10 | 10 | I already tried what you suggested, but ..... |
| John | 09/01/09 | 10 | 10 | 10 | 10 | |
| John | 08/28/09 | 10 | 10 | 10 | 10 |
Pravin.. following are the broad steps thatyou need to take. Hope this helps you. Let me know if you further get stuck. You can get some help from Cisco.com also. -sudhanshu Step 1: Define the traffic
Hi Pravin.. Sorry for the delay. You can reserve the bandwidth for the buldings using policy based routing and qos. With policy based routing you can divide the traffic in to two parts -- one for building
Both looks to be same as far technology and out put is concerned. Only difference being on WAN priting you print at a location connected through your wide area network and that is it is the trusted network
Neil.. What kind of connection do you have. Some times service providers over provision for IP addresses so in those cases you can get a conflict when someone fixes the IP addresses and one with dynamic
Don.. See if this helps. If you do ctrl+shift+B, you can organize your bookmarks which includes deleting or creating new folders to organize the way you want. Els you see where you favorite folder
Answers by Expert:

©2009 About.com, a part of The New York Times Company. All rights reserved.