You are here:
I can answer all questions for the following topics: Lan Design, Isdn configuration, Frame-Relay, Routing & switching, Vlan Configuration,OSI model,Tcp/Ip,Subnetting
Over 4 and a half years experience in the IT industry, worked in various roles such as Network Engineer, Technical Support Team Leader, Voice and Datacom Team Manager. Currently working as a Network Design Consultant for a ISO certified & SEI-CMMI Level 5 company.
Pursuing CCSP and CCIE
| User | Date | K | C | P | Comments |
|---|---|---|---|---|---|
| Will | 02/19/10 | 10 | 10 | 10 | |
| Abang | 02/01/10 | 10 | 10 | 10 | Tq. |
| Joseph | 01/31/10 | 10 | 10 | 10 | |
| trigan | 01/29/10 | 10 | 10 | 10 | Great answer |
| Paul | 01/25/10 | 10 | 9 | 10 |
Hello, You will need to buy a domain name, then have a NAT setup binding your internal server IP address to a public IP, this might be your Internet conenction WAN IP. The have the domain provider,
Hello, The Xbox device is unable to get an IP address from a DHCP server in your network. This is because you have connected the Xbox to your PC, and the DHCP server in your network is the BT homehub
Hello, The main device required to conenct a T1 line to your LAN is router which has a T1/E1 card. This needs to be configured as per the telephone provider settings. Then the router can connect to
Hello, You will need 7 x 48-port edge switches and a core switch which will connect to all edge switches. The switches can be located based on the port density on each floor. The IP addressing will
Hello Tom, Simple solution would be to type the IP Address of the myComp machine in the run box of the myAcer machine. You can get the IP address by going to the Command Prompt on the myComp machine
Answers by Expert:

©2012 About.com, a part of The New York Times Company. All rights reserved.