| Recent Answers from david burnett |
 |
2008-10-08 Reroofing over damaged shingles: Susan, I'm going to quote an earlier answer I gave to a similar question - please feel free to followup question if you like. If your roof is between a six and ten twelve pitch I would not rule out...
|
2008-09-28 Installing Valley Flashing on an Existing Roof: Ice and water would be fine although neither is necessary in my opinion. I would try to locate where the leaks are originating by lifting up shingles little by little looking for watermarks that go places...
|
2008-09-27 drip edge: I can't picture all the details but the bottom of the dripedge does need to be in the gutter otherwise it is useless. Some metal is not practical to bend because it is too rigid. Also a half inch or so...
|
2008-09-22 Roof leak: I think you could get something like a 25 ft. roll of aluminum flashing maybe 6 inches wide or wider and cut it so that you can slide it up under the bottom row of shingles and down over to where you want...
|
2008-09-18 Ridge Vent and Attic Fan: 1. I think it is fine for the bathroom to vent into the attic but some inspectors think otherwise. Also, I think some codes require it to vent outside. I feel like the moisture volume is minimal. 2...
|
| More Answers for "Roofing" |