Security & Fire Protection Systems/Expert Profile

Average Ratings

• Knowledgeability 9.95
• Clarity of Response 9.95
• Timeliness 10.0
• Politeness 10.0

• Number of Questions (in Past 24 Hours) 0
• Max Questions to be Asked (in 24 Hour Period) 5
• Total Questions (since joining AllExperts) 113
• Volunteer Since 2008-05-06
• Prestige Points 770

Recent Reviews from Users

Read More Comments

    K = Knowledgeability    C = Clarity of Response    T = Timeliness    P = Politeness

User	Date	K	C	T	P	Comments
Manon	09/29/09	10	10	10	10	Thanks very much for your installer! Since .....
Jocelyn	07/08/09	10	10	10	10	Thank you very much!! I needed this .....
Matthew	02/22/09	10	10	10	10	Thanks alot. I have none of the .....
Mark Spier	01/21/09	10	10	10	10
Scott	01/19/09	10	10	10	10	Thanks Steve, I'll get that looked at .....

Recent Answers from Steven Burman

2009-10-11 Trouble with Security System:

Tammy, Sorry for the delay, I was out for a minor operation, but all is well!! I'm not familiar with the Regency system, but I can give a good guess as to the error message - The system does not

2009-09-26 PC1555MX:

Manon, I have never worked with that model of DSC panel, so I am unsure of exactly how to access that option. Typically, it would be something like *8, installer code, 14, 1, 5, which should turn off

2009-09-25 Carbon Monoxide Detectors:

Vicki, Yes, the back-up battery going low will cause a "trouble" beep to come from the detector even though it still has household current, and the beeping will stop when the battery is replaced. There

2009-09-15 ademco security system:

Victor, There are 2 possible reasons - 1 - If you have a wireless system, it is telling you that one of the transmitters has a low battery that needs to be replaced. There should be a zone number

2009-09-05 Discontinue ADT Service:

Roger, Not a simple question. There are several factors at work - Do you own or just lease the system? You might think you own it, but check your contract very carefully. Are you under contract