You are here:

Metallurgy/Expert Profile


Ask A Question

Expertise

Metallurgy, corrosion, coating, Material, Metal, Welding, Paint, pipeline, test,

Experience in the area

inspection, corrosion protection, destructive and non destructive test, welding inspection

Publications

Journal of Sol-Gel Science and Technology: Optimization of process variables and corrosion properties of a multi layer silica sol gel coating on AZ91D using the Box–Behnken design Journal of Sol-Gel Science and Technology:High temperature oxidation resistance and corrosion properties of dip coated silica coating by sol gel method on stainless steel

Education/Credentials

masters of Material science

Average Ratings

Recent Reviews from Users

Read More Comments

    K = Knowledgeability    C = Clarity of Response    P = Politeness
UserDateKCPComments
Edward Hayduk05/20/13101010Thanks for your information. It was very .....
Rupesh03/18/13101010 
Aleksandr03/04/13101010thank you very much

Recent Answers from Bahaedin Nikrooz

2015-05-18 physical metallurgy:

Lines show the phase boundaries.Single phase regions are separated by lines of non-analytical behavior, where phase transitions occur, which are called phase boundaries.  in order to see how the phase

2015-05-18 physical metallurgy:

PHASE: In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform.Examples of physical properties include

2013-11-26 detect and separate iridium etc. from gold:

Metal detection is possible by Spark Alloy Elements Quantometer, also a simple method could be used: density measurement, As you know iridium is the second-densest element in the world (22.5 g/cm3), therefore

2013-05-19 Copper sheets:

1- Practically, most jewelry wire is sold now as either dead soft, half-hard, or hard, with dead soft being wire manufactured with a hardness of 0, half-hard being wire manufactured with a hardness of

2013-04-02 stainless steel:

The qualified electrode is 1554.6 in order to welding of Grade 904L.Care needs to be taken as this grade solidifies fully austenitic, so is susceptible to hot cracking, particularly in constrained weldments

 

Ask A Question

Metallurgy

All Answers


Answers by Expert:


Ask Experts

Volunteer


©2016 About.com. All rights reserved.