You are here:
My experiance is mainly in Ic powered model boats scale and semi scale. size from 2ft to 7ft long using glow plug and petrol engines. But NOT multi boats. I have converted many chainsaw and strimmer engines for this purpose. also designed and built three sizes of model waterjets for model boats.
Many members of the public ---- hobbies.
| User | Date | K | C | T | P | Comments |
|---|---|---|---|---|---|---|
| eric todd | 11/06/09 | 10 | 10 | 10 | 10 | I think I will be running either ..... |
| philip | 07/02/09 | 10 | 10 | 10 | 10 | thank you so much for clearing this ..... |
| norman | 07/02/09 | 10 | 10 | 10 | 10 | thanks i thought it was for a ..... |
| Josh | 06/20/09 | 10 | 10 | 10 | 10 | Very detailed answers, definantly knows what he ..... |
| Alan | 06/12/09 | 8 | 7 | 9 | 10 |
HI ERIC THIS IS A MATTER OF EXPERIMENTING LIKE ANY NEW SETUP PARTICULARLY A RACING SETUP THE SIZE COULD BE ANY THING FROM 1/2 INCH TO ONE INCH CHOKE DIAMETER. MEASURED ON THE ENGINE SIDE OF THE CARB!
HI AGAIN CAN YOU SEND A PHOTO ? CLOSE UP OF CAR WITHOUT BODY ON --SERVO PROBABLEY IN CENTRE OF CAR --CAN YOU SEE THE RECIEVER? THERE ARE DIFFERANT TYPES OR LAYOUT OFFCOURSE-- SEVERAL PLUGS COMING FROM
HI MICHAEL THE ANTENNA MAY NOT MAKE ANY DIFFERENCE .IF WE CAN FIX THE OTHER PROBLEMS FIRST WE CAN SOON TELL. THE PROBLEM MAY BE THAT THE SPEED CONTROLLER HAS BEEN ALTERED. DEPENDING ON THE TYPE OF CONTROLLER????
HI JON. Ideally you should install a engine cut out along with the rest of the radio gear in a water tight box.this will cut the engine if signal is lost! This appears to be normal behavior was the
Hi Rob Sorry must have diff on back and front best to use shafts all the time. If you do without diff then you can only drive one wheel at the back on one side only this will make poor performance why
Answers by Expert:

©2009 About.com, a part of The New York Times Company. All rights reserved.