Mike Fulcher - Chemical Engineering - Chemical Engineering - Science

About > AllExperts
	Search for

Main Menu

Login (Experts Only)

About Us · FAQ · Tell Friends About Us · Link To Us · Free Encyclopedia · Disclaimer · Tech Support

You are here: AllExperts > Science > Chemical Engineering > Chemical Engineering

Expert Profile: Mike Fulcher

Expertise: I can answer general questions related to all aspects of chemical engineering and material science, and specific questions related to electrochemistry, batteries, and ceramic materials.

Experience in the area
I have over eight years experience in the battery industry, covering Ni-Cd, Ni-MH, Li-ion, Li-ion polymer and Li primary chemistries. I have over four years experience in the field of ceramics processing.

Education/Credentials
BSChE, University of Florida MSChE, Worcester Polytechnic Institute

Ask a Question	View Past Answers	View Ratings

Average Ratings
Prestige Points: 910
Knowledge	9.76 Best of the best
Clarity of Response	9.72 Best of the best
Timeliness	9.90 Best of the best
Politeness	9.83 Best of the best
Number Of Questions (in Past 24 Hours)		0
Max Questions to be Asked (in 24 Hour period)		3
Total Questions (since joining AllExperts)		238

Recent Reviews from Users

Knowl	Clarity	Time	Politeness	Date
10	10	10	10	09/17/08
10	10	10	10	09/16/08
10	10	10	10	08/21/08
10	10	10	10	07/28/08
10	10	10	10	06/18/08

User Comments

Thanks for the answer. I will try it out. Your answer was very well reasoned.
(Paul Prado on 09/17/08)

Thanks
(Mark on 09/16/08)

High calibre reply - thank you.
(Catherine on 08/21/08)

Great response!!!
(Dele on 07/28/08)

View All Comments

Ask a Question	View Past Answers	View Ratings

Recent Answers from Mike Fulcher

2008-11-25 Halogen bulb burnout smoke: I've seen what you are talking about, but don't know what exactly it is off the top of my head. I would try some calcium remover (dilute phosphoric or sulfonic acid) to see if this does anything. It...

2008-10-28 Cesium Power: To determine the energy generated by this reaction, you need to know the "heat of formation" of the compound that's created by the reaction. My first guess would be cesium hydroxide. If you find it's...

2008-09-20 Zamboni Battery Part 2: Well, from what you're telling me it seems as if there may be an current leakage path in the battery. This is a common problem in bi-polar cells, where what typically happens is that ionic transfer occurs...

2008-09-19 Zamboni Battery: Now for more questions. Which side of the paper do you paint on? My guess would be the paper side, not the foil side right? After painting on the non-foil side you've got a manganese dioxide - aluminum...

2008-09-19 Zamboni Battery: Paul Theoretical voltages are typically higher than actual measured voltages because of polarization potentials caused when you draw the small amount of current necessary for measurement. Your low...