Belinda R. Gattman - Welding - Construction Industry - Industry

About > AllExperts
	Search for

Main Menu

Login (Experts Only)

About Us · FAQ · Tell Friends About Us · Link To Us · Free Encyclopedia · Disclaimer · Tech Support

You are here: AllExperts > Industry > Construction Industry > Welding

Expert Profile: Belinda R. Gattman

Expertise: Most on welding and fabrication, blueprints, pipefitting, orbital welding. I can give advice on technique and choosing the right rods, process, and material to use. I know a few short cuts to use that may help in different areas. I have helped train new welders and have been welding in the construction industry for 31 years.

Experience in the area
I have worked in the construction industry 31 years. I have worked in several environments that would include petrol-chemical, nuclear, pharmaceutical, paper mills, clear room facilities, and much more.

Education/Credentials
Diploma in Welding Technology - 1976 Augusta Tech. College Diplomas in Industrial Mechanical Control Tech. specializing in Instrumentation Installation and Electrical Installations -2006-Savannah Tech. College. Associates Degree in HVAC - 2006 - Savannah Tech. College

Ask a Question	View Past Answers	View Ratings

What do you like about this subject? You can always find a job.And you can make and do just about any thing you want. Everything.You can always find a job. if you like to travel you can see the world if you have a mind to.

What do you still hope to achieve/learn in this field? This type of work is changing every day, from different types of welding processes, to different material.

Average Ratings
Prestige Points: 420
Knowledge	10.0 Best of the best
Clarity of Response	10.0 Best of the best
Timeliness	9.77 Best of the best
Politeness	10.0 Best of the best
Number Of Questions (in Past 24 Hours)		0
Max Questions to be Asked (in 24 Hour period)		5
Total Questions (since joining AllExperts)		75

Recent Reviews from Users

Knowl	Clarity	Time	Politeness	Date
10	10	10	10	10/22/08
10	10	10	10	09/01/08
10	10	10	10	08/27/08
10	10	10	10	08/25/08
10	10	10	10	06/05/08

User Comments

Thanks for your response, much appreciated
(Ray on 09/01/08)

Very clear, informative answer. I really appreciated the clarity she gave me. Thanks again.
(Tracy on 08/27/08)

thank you
(jeremy on 08/25/08)

thank your for your prompt answer.
(cherlenej on 06/05/08)

View All Comments

Ask a Question	View Past Answers	View Ratings

Recent Answers from Belinda R. Gattman

2008-11-10 3G CERTIFICATION, 1 INCH STEEL: Ok, Are you talking flux or the molten metal? Let me just kinda walk you through this test. I think that will be best. This is how I would do it: First grind your bevel on your plates then put...

2008-11-05 welding: I would continue you education. Once you learn tig, you will have a better chance with employment. If you learn to tig and stick pipe(this is also know as being a combo welder)you will have no problem...

2008-11-05 3G CERTIFICATION, 1 INCH STEEL: I'm sorry it's taken so long to answer this question, my computer has been on the blink. You don't tell me if you are using a back up strip and I assume you aren't. With a 6011 you can use any of these...

2008-10-20 pipe welding: First I think Sub arc welding is different from flux core, but with this I'm not an expert in. But I can tell you that on pipe you have 4 tacks, top, bottom, and one on each side. If you are using flux...

2008-10-17 blueprints: I would go to the public library and go to the blue print section or to the trades section. There should be books with those type of blue prints. you can also go to www.gangbox.com for all types of books...