Scratch - Welding - Construction Industry - Industry

About > AllExperts
	Search for

Main Menu

Login (Experts Only)

About Us · FAQ · Tell Friends About Us · Link To Us · Free Encyclopedia · Disclaimer · Tech Support

You are here: AllExperts > Industry > Construction Industry > Welding

Expert Profile: Scratch

Expertise: I am a certified welder holding 3G 4G and 6G certifications with TIG STICK and MIG processes. Questions dealing with carbon and stainless steel components I could be most helpful in.

Experience in the area
With over 20 years in the welding field, I am currently employed as a journeyman pipe rig welder for Tradesmen International where I may travel over the country. I have knowledge with testing procedures, cutting equipment and with safety procedures. I have also been employed as a superintendent for two steel erection companies.

Education/Credentials
Technical school graduate and worked my way to a journeyman welder

Ask a Question	View Past Answers	View Ratings

Average Ratings
Prestige Points: 190
Knowledge	10.0 Best of the best
Clarity of Response	10.0 Best of the best
Timeliness	10.0 Best of the best
Politeness	10.0 Best of the best
Number Of Questions (in Past 24 Hours)		0
Max Questions to be Asked (in 24 Hour period)		5
Total Questions (since joining AllExperts)		23

Recent Reviews from Users

Knowl	Clarity	Time	Politeness	Date
10	10	10	10	09/22/08
10	10	10	10	08/28/08
10	10	10	10	06/05/08
10	10	10	10	06/05/08
10	10	10	10	03/21/08

User Comments

Sorry to make you answer this question again. After submitting my question, I saw where someone asked the same question a few weeks ago. But thank you
(Ryan on 09/22/08)

THANK YOU AND I MAY BE BACK WITH MORE QUESTION ,I AM A WELDER BY TRADE ,BUT I ALWAYS BEEN TAUGHT BY OLD SCHOOL .TO RESPECT AND ALWAYS LOOK TO MLEARN
(Rick on 08/28/08)

Thank you for the quick response.
(Ashley Bell on 03/21/08)

View All Comments

Ask a Question	View Past Answers	View Ratings

Recent Answers from Scratch

2008-10-07 6-G Certified Welder: Daniel, I do appreciate the offer, however I must decline at this time. I was offered a job in my hometown making about what a road hand would make and I could not say no to them. I have several...

2008-09-21 6G test hints: Ryan, I come from a boiler background myself and I have worked all over the states doing that type of work on power and other type of plants for shutdowns. A 6G test is simply just the position of...

2008-09-17 welding flash prevention: Tim, It is the responsibility of the employer to provide proper means of protection against flash burns, however it is your responsibility to inform of such a hazard. Welding blankets, wooden boards...

2008-09-04 weld test: Mike, A 6G test is a pipe test in a 45 degree position. Usually most contractors require this test to be given on a heavy wall 2" pipe with a tig or 6010 root with either tig welded all the way out...

2008-06-06 about 6010root: Ramesh, It takes lots of practice, but I'll try to get you through it. Your test coupons should have a 1/8 landing on the pipes, 3/32 gap and 1/8 6010. Turn your machine to 65-75 amps (just enough...