You are here:
Major Appliances/Expert Profile
Expertise
I do not work on import brands..ie: Bosch,Samsung, LG etc Most domestic washers.dryers, stoves and refrigerators I can help with. Also you can check out my website at:WWW.COOLKAT.BIZ
Experience in the area
I have been in the major appliance field for almost 20 years and will help if I can
Organizations
BEAR
Education/Credentials
lots of "in the field" experience
Average Ratings
Recent Reviews from Users
K = Knowledgeability C = Clarity of Response P = Politeness| User | Date | K | C | P | Comments |
|---|---|---|---|---|---|
| Brian | 04/18/09 | 10 | 10 | 10 | |
| Tim | 04/04/09 | 10 | 10 | 10 | Hi, Very prompt and Knowledgeable, easy to ..... |
| Dade | 03/27/09 | 5 | 5 | 5 | Inside Drain Hose had a pin hole ..... |
| Alyson | 03/18/09 | 10 | 10 | 10 | Wow! Super fast response! And, I followed ..... |
| Tom | 03/16/09 | 10 | 10 | 10 | Thanks again, Mike for the education and ..... |
Recent Answers from Mike
2011-01-01 Kenmore refrigerator:
HI Michelle, I'm sorry to say but that information is coded into the serial number and I do not have access to the codes....please contact Sears directly, as it is their product. If you keep your
2009-04-15 Jenn aire range fan issue:
hi Mike, The cooling fan is there to protect the electronics, and I have not heard of it coming on too soon. I have heard of it turning on on hot days when the oven is not in use. Unless there is an
2009-04-14 Stove not working:
Hi Eydie, You do not need a new stove, however you do need someone that knows what they are doing to find out where the problem is and to work through the issue. You most likely have a wire loose that
2009-04-13 Neptune Washer:
Hi Brian, The water valve has failed and is allowing water to seep into the tub. Depending on the serial number of the washer, there are two different valves. http://coolkatappliance.partsquik
2009-04-10 frigidaire washer:
Hi Noel, If the unit works for a bit, then stops and does nothing until it has a chance to cool down, then unfortunatly you are correct. The motor is bad. The motor is overloading in spin and shutting
Answers by Expert:
©2012 About.com, a part of The New York Times Company. All rights reserved.