You are here:
I can answer just about any Auto Glass Question.
30+ Years in Auto Glass Industry. Plate, Lexan, Custom cut Lami, Mirrors, Window Motors,Ect..
AGA,MAC,PPG
On the side of my Refrigerator :)
12th Grade
Sure I would Love Some :)
UPS,US Post office, Nascar, FedX ...
No Job is Ever the same, They are all different!
| User | Date | K | C | P | Comments |
|---|---|---|---|---|---|
| Randy | 01/15/12 | 10 | 10 | 10 | Got my ansewer. Thanks |
| richard | 10/19/11 | 10 | 10 | 10 | |
| jim dayringer | 10/07/11 | 10 | 10 | 10 | thank you |
| Ron | 09/27/11 | 7 | 10 | 10 | thank you i.ll check it out |
| Al | 09/06/11 | 9 | 9 | 9 | Thank you for you reponse. Several estimates ..... |
Hi Mark, I looked up a 2011 Pathfinder quarter glass and there is no divider as far as I can see from any of the photos I have seen , SO I think we are talking rear vent glass here. If not please
Hi George, I would say if your talking about all Windshields in all cars you can only make a Guess because they make 2- 3 4- different windows for every one model and then times that by
Hi Jim, Depending on the the material the latch is made of Plastic or Metal , I would use a 2 part epoxy on the Metal Latch and a Urethane adhesive on the Plastic Latch.
Hi Ron, I have never replaced one of these but this guy on Ebay has a store Perfect Fit Convertible tops and he wants 119.00 for a New one with the cloth and all. Talk to him
Hi Andre, They could be available aftermarket from us but you would have to send me the picture of the old one or at least the measurements and description of the bottom, holes or threaded

©2012 About.com, a part of The New York Times Company. All rights reserved.