You are here:
I can answer all questions pertaining to all phases of drywall construction, plastering, stucco, and dryvit. Hanging, taping, texturing, painting, metal stud framing, insulation,and sound proofing as in home theaters, offices, and condos
35 years in the trade. Was senior estimator and project manager for a large company for 13 yrs. Currently own and operate GTX Industries, Inc. Started out packing sheetrock and worked my way up.
high school diploma course in Good Sense construction practices
Businessman of the year, 2001
| User | Date | K | C | P | Comments |
|---|---|---|---|---|---|
| Bill | 04/04/10 | 10 | 10 | 10 | |
| FG | 04/04/10 | 10 | 10 | 10 | Thanks!! |
| desgnr | 03/10/10 | 10 | 10 | 10 | |
| Bill | 03/10/10 | 10 | 10 | 10 | A terrific resource. Answers are always very ..... |
| Arvind | 03/02/10 | 10 | 10 | 10 |
Hello Mike I think I would use a heavy grit of sandpaper first to try to knock off some of the sand first, and try the method you described. Don't make the mud too thin(paint consistency might be too
Hello Bill- I would use a stain killing sealer over some of the spots and see if this stops the water marks from bleeding through. Kilz is a good product, and I would use the shellac based one, as it
Hi Ian- Its sounds like a good mystery to me also. Here in the states, that usually means heat/ cold transfer through the joists, and or moisture or maybe more accurate, humidity. The moisture can be
Hello Howard- I hope these are in the corners, and not anywhere else. Cracking is normal, to a degree, and should not be getting any worse after a year. If there is more happening, it could be due to
Hello Ian- This is caused by a lack of a vapor barrier at the ceilings, and not enough insulation in the attic. When the heat from inside meets the cool air in the attic, or vice versa, without the insulation

©2012 About.com, a part of The New York Times Company. All rights reserved.