Plumbing in the Home/Sharon McCarthy

To Profile Page

All Reviews from Users

    Column Headings:

      K = Knowledgeability    C = Clarity of Response    T = Timeliness    P = Politeness
      N = Nominated for Expert of the Month

DateUserKCTPNComments
2009-11-23Janet10101010NoThanks Sharon, I did get a "oil filter" wrench that did the trick. Between the wrench and taking the tank downstairs to put it on a table where I could get better leverage. I can see now part of the problem with working on toilets in doing the work on the floor of a small bathroom. But after 4 trips to Home Depot and suffering for 2 days with my husband not talking to me. The toilet is back in operation. Thanks for the answer.
2009-11-22Ken10101010Yes 
2009-11-22John Bilnoski10101010YesThis sounds very easy. I did try to tighten the unit from below the sink...........I guess my issue was that I was not able to grab the nut to turn. I was able to hold the threaded shaft and then turn the faucet from above which obviously made it a bit more loose than before. I'll try your method and will hope for the best. Thank you very much. This question and answer was very simple, fast and useful. Thank you again.
2009-11-22Venu10101010NoThanks Sharon. Your diagnosis and tips were right on the dot. I was able to use a wrench (the pliers I had was not big enough to go around the handle) and, following your instructions, got the valve open. I greatly appreciate your help in this regard and the service you are providing others. Have a great Thanksgiving.
2009-11-20Marty10101010No 
2009-11-19Delores10101010YesSharon is terrific!
2009-11-19mohammad10101010Yes 
2009-11-19Zach10101010Yes 
2009-11-17Patty10101010YesThanks so much for your help Sharon. I think I'll just do what you suggested now. That sounds good where I can also move a pipe to various locations and that would do the trick. I don't see the need to go through all of this sump pump thing and things like that. In fact, I ran into a neighbor from down the street at the Post Office this afternoon. He told me that he has his going out the side of his house and a 10' PVC pipe that just takes the water to where he needs it. It never had a freeze up problem or anything like that. He did say though, that over 10 years ago when he moved in, he had major septic problems when a rain would occur and then try to do a bunch of washes. The water tables here just can't handle it, so he disconnected the washing machine back then. Well, thanks so much for your help. Also, thanks so much for putting your time into All Experts. Patty
2009-11-16John10101010YesThanks very much for your help, Sharon! :o)
2009-11-13eddy10101010Yes 
2009-11-13Geoff Miller10101010Yes 
2009-11-11Mike10101010No 
2009-11-11Mike10101010YesWonderful response! Response was timely, I posted question @2pm and received answer @9pm! Response was well thought out and covered every aspect of my question. Sharon is a TEN in all aspects: knowlegeable, politeness, friendly and very easy to undestand explanation. THANKS SHARON!!!
2009-11-09Joanna10101010YesWow - I didn't specify the type of valve or anything... and Sharon was right on and wrote back in about an hour. My mouth dropped after reading the response! I will try that tomorrow and hopefully it all works out... if not, I'll try a follow-up question. I really appreciate the time/response! Joanna
2009-11-08Shirley10101010YesCan't thank you enough for the help you have given and how fast you have responded. Hope I don't have any problems in the future, but If I do, I certainly hope you will be available to help me. Thanks so very much for your help.
2009-11-04Leroy10101010YesThanks for your response, I have resolved the problem. This is an older house and the problem was a old pipe (cast iron) which ran under ground and it had split and clog up with gunk. Problem detected by running a snake and digging up the pipe. Leroy
2009-11-04John Meduri10101010NoThe flexible water hoses come in copper and the braided type. I used the copper since it was easier to bend it to where I had to make the connection. For the gas, they come in various inside diameters depending on the BTU input of the appliance. You confirmed that they were able to be used and I learned about what was available and how to use them. It saved a lot of time. Thanks.
2009-11-04keith10101010NoThank you.
2009-11-04Jacob10101010YesThanks for the quick response. I never would have thought to pour water down to see if it sits their. You gave me a "DUH" moment, but it sure beats breaking cement and digging to look for a p-trap. Thanks again. Jacob
2009-11-02Jody10101010YesVery helpful advice with added details. Thank-you.
2009-11-01Michael10101010YesI very much appreciate the feedback, Sharon. Very thorough and insightful. I will check on the things you point out before the parts arrive, particularly making sure everything is tight below the lever (I had it apart so many times I can't recall for certain that I tightened the cartridge nut the last time I put it back together...). Thanks again!
2009-11-01Scott10101010NoThanks! Great answer
2009-10-29bob10101010Yesthe describe solution worked! thanks so much! Perfect advice!
2009-10-28Dan10101010No 
2009-10-28Chuck8101010YesSharon,
2009-10-27randy10101010YesQuick and clear answer. Could not ask for anything better. Number one in my book!
2009-10-27angie10101010YesThank u for your quick response
2009-10-26Matt10101010YesSharon is very helpful and responded very quick to my question
2009-10-24Ray10101010Yes 

Page:   1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9  |  Next 

 

To Profile Page

All Answers

Answers by Expert:


Ask Experts

Volunteer


Sharon McCarthy

Expertise

I can help with most questions about residential plumbing problems including septic systems, and some questions about irrigation. I have no experience with commercial installations or codes.

Experience

I have been a sole-proprietor service plumber in two small towns north of Phoenix Arizona for 26 years.

Publications
I had a monthly column in the United Steelworkers of America, local 1033, newsletter 1978 to 1982. I wrote an article for "The Theosophist" in 1977. I've written dozens of letters to the editor in many newspapers.

Education/Credentials
High school and three years of college. My step-father, having worked 40 years in the plumbing trade in Chicago, taught me for two years. The rest has been hands-on experience.

Past/Present Clients
Many hundreds of good people in Cave Creek and Carefree Arizona

©2009 About.com, a part of The New York Times Company. All rights reserved.