You are here:
Small Engines (Lawn Mowers, etc.)/BEN
All Reviews from Users
Column Headings: K = Knowledgeability C = Clarity of Response T = Timeliness P = Politeness
N = Nominated for Expert of the Month
| Date | User | K | C | T | P | N | Comments |
|---|---|---|---|---|---|---|---|
| 2009-11-10 | Pat | 10 | 10 | 10 | 10 | No | Thanks Ben, I will try this. |
| 2009-10-31 | Bill Loewenhagen | 10 | 10 | 10 | 10 | Yes | |
| 2009-10-31 | clayton wood | 10 | 10 | 10 | 10 | Yes | |
| 2009-10-21 | allan | 10 | 10 | 10 | 10 | Yes | Thanks Ben, I just needed a shove in the right direction. I understood everything and I will work on it tomorrow. You have been most helpful, Now I know what to look for. Thanks again, Allan |
| 2009-10-08 | clay | 10 | 10 | 10 | 10 | Yes | |
| 2009-09-26 | James Deising | 10 | 10 | 10 | 10 | Yes | Thank you very much. |
| 2009-09-17 | STEVE | 10 | 8 | 10 | 10 | No | the spec. range of the compression in lbs would of been helpfull also. |
| 2009-08-03 | jeff | 10 | 10 | 10 | 10 | Yes | thanks ben for your time i will explore a few of those options and I will more than likley fix it! If not I will get back with ya! Once again thank you. |
| 2009-08-01 | Dennis | 10 | 10 | 10 | 10 | No | Thanks for the help. I will try to correct with your help again thanks |
| 2009-07-21 | James | 10 | 10 | 10 | 10 | Yes | Thank you Sir!! |
| 2009-07-09 | James | 10 | 9 | 9 | 10 | Yes | Thanks for the response Ben! I had a hunch it was a timing issue, but had no idea of how to set it. As your quota was reached, I sent a follow-up to another expert, but thank you again for your time. James |
| 2009-06-23 | Ken Uptain | 10 | 10 | 10 | 10 | No | Thank you! |
| 2009-06-20 | Mike | 8 | 10 | 10 | 10 | No | |
| 2009-06-14 | Sharon | 10 | 10 | 10 | 10 | Yes | Top notch help!!!! |
| 2009-05-28 | David | 10 | 10 | 10 | 10 | No | |
| 2009-05-25 | Rob | 8 | 8 | 10 | 10 | Yes | thanks Ben |
| 2009-05-22 | Jerry | 10 | 10 | 10 | 10 | Yes | Thanks for the advice. |
| 2009-05-20 | Bob | 10 | 10 | 10 | 10 | No | |
| 2009-05-13 | Steve | 10 | 10 | 10 | 10 | Yes | |
| 2009-05-03 | eric | 10 | 10 | 10 | 10 | No | |
| 2009-04-30 | BILL | 10 | 10 | 10 | 10 | Yes | THANKS BEN I WILL TRY THIS I NEED TO REPLACE ALL GASKETS BECAUSE I DO HAVE OIL EVERYWHERE WILL TRY AND WILL LET YOU KNOW THANKS again BILL |
| 2009-04-22 | John | 10 | 10 | 10 | 10 | No | |
| 2009-04-20 | Charles | 10 | 10 | 10 | 10 | Yes | I much appreciate the help. Thank you. |
| 2009-04-19 | randy | 10 | 10 | 10 | 10 | No | |
| 2009-04-16 | Aaron | 7 | 10 | 10 | 10 | No | THANKS FOR THE INPUT |
| 2009-04-14 | Steve Artz | 10 | 10 | 10 | 10 | No | Thank you. |
| 2009-04-14 | Bill | 10 | 10 | 10 | 10 | No | Thanks Ben. I found that the electronic clutch engagement sitch was not fully seated in the off position. |
| 2009-04-07 | Anthony | 10 | 10 | 10 | 10 | No | Ben, thank you, you have given me several suggestions and tips. Thanks for answering my question so completely and quickly, I appreciate it. |
| 2009-03-13 | Ian | 10 | 10 | 10 | 10 | Yes | Thanks, very helpful and rapid response. Ian |
| 2009-03-02 | ted | 10 | 10 | 10 | 10 | Yes | so far, all that you suggested was good. need to find of what what compression is supposed to be. could be timing caused by a bad key. we'll see .........thanks for your input |
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Next
Answers by Expert:
BEN
Expertise
I will answer most questions related to this field of small engine repairs,servicing them and trouble shooting problem.Can not answer questions with out the proper Engine Model#,Spec # and Manufacture.
Experience
Presently own a small engine repair shop and a Electrical contracting business.I have been in this field for 26 years.
Education/Credentials
Kohler,Briggs & Stratton,Tecumseh,MTD,Honda,and other Dealer Schools
Awards and Honors
HONORABLE DISCHARGE FROM THE UNITED STATES NAVY VIET NAM SERVICE MEDAL,GOOD CONDUCT AWARD EXPERT MARKSMANSHIP AWARD
©2009 About.com, a part of The New York Times Company. All rights reserved.